STILLWATER, USA – Take KICKER’s knack for reliable power to the water with the new KICKER MX-Series Marine Amplifiers. MX Amps sourcing power to any KICKER KM-Series Marine Speakers create a musical merger sea worthy enough for any boat captain.

Using all the know-how of the indestructible ZX Amplifier Series, the MX-Series combines absolute power with KICKER dependability.  Available are the KICKER MX350.4 4-Channel Amplifier and the hybrid KICKER MX700.5 Multi-Channel Amplifier with Class D Sub Section.

With four channels, the MX350.4 allows numerous possibilities for putting together a system. It rates at 90 watts x 4 channels*, and includes a built-in, variable 12dB/octave high-, low-, or all-pass electronic crossover. It also has a KICKEQ™ Boost that offers up to 18dB of bass.

While the MX700.5 provides 85 watts of power x 4*, it’s also equipped with a 420-watt mono channel to satisfy your bass cravings. It uses the same 12dB/octave crossover, only with a 24dB/octave, sub-channel low-pass option. Both MX Amps have easily accessible, top-mounted
switches, LEDs, and dial controls for the crossover, boost, and gain as well.

Furthering KICKER’s reputation for electronics dependability, MX Amplifiers protect your audio system’s power from moisture and humidity with a gasket-sealed cover for the top-mounted controls and gasket-sealed endcaps. Rubber caps cover the RCA inputs, silicone boots shield
all fuses, and the circuit board has been sprayed with a special corrosion-deterring, conformal coating. MX Amps also incorporate a new style of fortified power inputs and speaker outputs designed to meet or exceed U.S. Coast Guard and American Boat & Yacht Council’s standards
for wired connections.

KICKER Car Stereo is a member of the ABYC and is its first from the audio electronic industry. KICKER is also a member of the National Marine Manufacturers Association (NMMA), which actively supports the U.S. recreational boating industry.
* - powered at 2 Ohms, 14.4 volts

KICKER MX-Series Multi-Channel Amplifiers Specifications

Multi-Channel Model (at 14.4V)                                                             MX350.4                MX700.5
Power (watts/channel), 2 Ohm stereo                                                   90 x 4                    85 x 4
Power (watts/channel), 4 Ohm bridged mono                                       175 x 2                  165 x 2
Power (watts), Class D 2 Ohm mono                                                        –                            420
Remote Bass Control                                                                               No                           Yes
Dimensions (in., mm);
(all models 2-1/8"H x 9-5/8"W x ..."L,                                                  13-1/2,                        20,
54mmH x 244mmW x ...mmL) 342 507

Common to all Models
Frequency Response: 20Hz-20kHz, +0/-1dB
Input Sensitivity: 125mV-5V; Signal-to-Noise Ratio: >95dB, a-weighted, re: rated power
Active Crossover: MX350.4 12dB/octave, variable 50Hz-200Hz, selectable high pass, low pass, or all pass; MX700.5 12dB/octave, full-range channels selectable high or all pass; 24dB/octave, sub channel low pass only KICKEQ™ Boost: Variable to +18dB, centered @ 40Hz (MX700.5 boost sub channel only)